Rec Setting Range
Alfa Romeo 147 M-JET
1.9 JTD 110kw
9 - A
Rail and Turbo
HOW DOES THE DIESEL POWER PERFORMANCE SYSTEM WORK?
There is a lot of mis-information and market bred confusion as to how diesel performance systems work. Some make outrageous claims that are simply technically impossible. Below we will outline the function of a Diesel Power Module in plain English, allowing you to understand what it does and how it will benefit your vehicle.
The Diesel Power Module brand have two types of modules, single channel fuel rail modules and two channel fuel rail and boost pressure sensor modules.
The single channel fuel rail module is an interceptor module, it intercepts signals coming from the ECU going to the fuel injection rail and sends modified signals back to the ECU from the fuel rail.
MYTH: Some competitors claim that their fuel rail modules change engine timing. FALSE! A module that is installed downstream of the ECU cannot physically have any influence on the timing of a motor. The ECU has already calculated this information and sent it to the relevant control mechanisms.
Our modules work by:
Directly influencing injector pressure which modifies the pulse width and cycle duration - German engineered technology speaks to the ECU with ACTIVE software management actively adjusting air fuel ratio based on engine load & RPM through the regulation of fuel pressure in the common rail fuel injection system. Fuel rail pressures modified by the module NEVER exceed the factory specifications of the motor, simply they increase the pressure or decrease the pressure based on what you are doing with the vehicle at the time. The engine diagnostic circuit would produce a check engine light if there was ever any running conditions that were outside of the manufactures specifications. Simply, the module will never harm your motor.
Increasing airflow to the engine - turbo charger boost pressure increases earlier in the rpm range in response to the increased fuelling, this increase in airflow combined with improved fuelling allows much more efficient running conditions for the motor allowing increased driveability and performance from your vehicle.
A vehicle producing more power at lower rpm saves fuel. Fuel efficiency is the bi-product of an engine that has increased torque at lower rpm when driven accordingly.
You will see some modules connect up to the individual injectors, this system is just an unnecessary and complicated method of achieving exactly what our Diesel Power Modules do by piggybacking the fuel rail plug, just making installation time longer and messier.
TWO CHANNEL FUEL RAIL AND BOOST SENSOR MODULE
The two channel fuel rail and boost pressure sensor module offers all of the features of the single channel module and works in the same way, but also offers direct modification of the boost signal which optimises air flow into the motor creating even more power and a smoother torque delivery. These modules are engineered specifically for individual motors, meaning tighter fuel mapping and better performance. At under $1000 these modules offer significantly better value than competing single channel modules retailing for over $1400.
When you buy a Diesel Power Module you take advantage of a strong German engineered and manufactured product with over 20 years of diesel tuning and development of performance modules. Diesel Power does one thing and this is performance tuning modules for turbo diesel and petrol motors . They are the world market leaders in plug in user friendly Diesel Power Modules.
How Diesel Power Modules benefit your vehicle and driving experience:
Easily install the Diesel Power System in less than 15 minutes. Easy to remove or bypass for vehicle servicing. A bypass plug is included with every module to remove the module without removing the module harness if desired.
When you purchase a Diesel Power Module you receive:
1 x Diesel Power Module
1 x Installation harness
1 x Bypass plug
1 x Module Synthetic bag with velcro fitting strap
1 x set of General installation instructions
1 x set of specific install pictures for your vehicle
1 x 3 year replacement warranty sheet
1 x 30 day money back satisfaction guarantee
GERMAN DESIGNED AND MANUFACTURED
Every diesel engine optimisation module is made to demanding German quality
standards using German manufactured military grade electronic hardware.
INCREASED POWER AND PERFORMANCE - ACTIVE SOFTWARE MANAGEMENT
The Diesel Power software automatically adjusts to the vehicles load and RPM. Customers experience an increase in power (Torque and Kilowatts) while decreasing fuel consumption when driven accordingly.
User adjustable fuel control. There is no need for complicated laptop tuning, you can adjust the fuelling using the dial on the front of the module to modify for additional performance enhancements such as larger exhaust systems, to get more power or to tune more for economy depending on your application.
TUV & e1 Certification “CERTIFY” That the diesel power system…
- will not interfere with other electronics in the vehicle, and
- verifies that stated power and economy figures are accurate.
The German H. & N. Electronics GmbH is a worldwide leading producer of diesel optimisation systems. Our proprietary DIESELPOWER® technology significantly increases the efficiency of diesel and petrol engines – up to 25% higher performance with less fuel consumption.
The company, founded in 1990, is headquartered in Isny, from where we manage development and production centrally. Our highly qualified staff and trained specialists ensure reliable and timely order processing. DIESELPOWER® is marketed internationally through branch offices in Spain and Canada as well as distributors in Switzerland, Norway, Sweden, Panama and Australia. DIESELPOWER® stands for the best quality and customer service worldwide.
TUV certification involves rigorous testing of the applications for which the component is designed. It includes verification that the device satisfies the strictest European regulations for the industry in which the component was designed for and ensures the component specifications are stated correctly. Periodic retesting of the component is required to maintain TUV approval and the certification is without question the most comprehensive testing any product would undergo. In the case of a tuning module, TUV approval means the product complies with legal exhaust-emissions standards.
TUV testing of a tuning module includes:
* Verifying the use of quality materials in the manufacture of an automotive product.
* Emissions standards are similar to the original manufacturers standards.
* No danger in the fit or use of the product.
* Verifying that stated power and economy figures are accurate and are not misleading.
Q: Will Diesel Power module void my factory warranty?
A: While the answer is straightforward from a legal point of view, we would like to educate our customers on some industry realities and offer some common sense precautions to minimize your risk.The Federal Magnusson-Moss Warranty Act protects consumers of aftermarket products
- In Australia a consumer is protected under the nationwide Australian Consumer Law which incorporates the individual State Governments Fair Trading and Consumer Affairs Law -.
The act states that if something breaks on your car and you take it in for warranty repair, the dealer must honor your warranty unless they can prove that whatever modifications you have added to your vehicle actually caused the problem.While as a consumer you have strong legal protection regarding your vehicle's warranty, there is also a practical reality that different automotive manufacturers and dealers have greatly varying views on aftermarket products, in particular those that produce much-desired added horsepower, such as performance modules, chips, exhaust systems, and modified intake manifolds. There are dealers and manufacturers out there that will use the presence of a performance upgrade to void your vehicles warranty. They will do this regardless of which performance upgrade you are using.The bottom line is that while the law protects the consumer and provides for enforcement of the warranty, it is very difficult for most people to hire a lawyer and fight a voided warranty. DIESELPOWER recommends that you disconnect any performance-enhancing device prior to taking your vehicle in for service.
Q: Will the Diesel Power module cause any damage to the transmission?
A: No, however hard driving styles or abuse can cause damage to transmissions even at stock power levels.
Q: Will the Diesel Power module improve fuel efficiency?
A: Yes, based on your driving style you may see a 8% improvement in fuel efficiency due to the significant increase in low RPM torque. Fuel efficiency will vary due to individual driving styles.
Q: Can the Diesel Power module put any strain or cause any damage to my engine?
A: The Diesel Power module is designed and programmed in every case to improve the vehicles performance no more than the engines safety limits will allow, our module is programmed very carefully to insure no extra strain is put on the engine and all of its components such as turbo and injection equipment. To this day we have never had an incident where our module has caused ANY engine related problems. The life of an engine is determined by how it is driven and looked after. We have installed many Diesel Power modules on older, high milage cars and have cars that have been using the module for years without any problems.
Q: Is there a warranty on the Diesel Power module?
A: Yes, we give a 3 year direct replacement warranty for any faulty Diesel Power module.
Q: Will the Diesel Power module make my car smoke?
A: If your vehicle does not smoke already then the answer is no, if your vehicle already smokes then in many cases, the module helps clear up your emissions, due to the increase of efficiency in your injection equipment.
Q: Fitting and maintenance?
A: Fitting varies from vehicle to vehicle, but in most cases it takes no more than 15 minutes and can be done by almost anyone. The Diesel Power module requires no maintenance at all.
TERMS OF WARRANTY:
3 Year warranty on all DieselPower® Modules against workmanship and or electronic module failure. This warranty is nontransferable,
it applies only to the original purchaser. All warranty claims must be pre-approved and returned to KPD
Industries Pty Ltd with $10.00 of postage stamps or a prepaid bag included within the package to cover the cost of return
shipping. Please ship using AusPost.
You should seek professional advice before installing your module.
THIS A HIGH PERFORMANCE PRODUCT – USE AT YOUR OWN RISK.
By installing this product, the customer understands and agrees that as a performance product individual results may vary depending on
vehicle mechanical condition and driving style. They must also understand that the original manufacturer makes it’s own determinations
regarding add-on products to their warranties, and that this limited warranty is the only responsibility assumed by DieselPower®, which
is limited to the original purchaser of the product. The DieselPower® product may interfere with and should be removed from the vehicle
prior to any diagnostic test procedures being performed.
DieselPower® hereby warranty’s its products against any and all defects in workmanship and materials for 3 years from the date of
purchase. If DieselPower® receives notice of claim during the warranty period, DieselPower® Australia in consultation with DieselPower
Germany at it’s own discretion, will replace the defective part or parts without charge to the customer except shipping.
This warranty shall not apply to defects resulting from freight damage, accident, misuse, unauthorized service, modification or incorrect
installation. DieselPower® Australia retains the right to inspect the part to determine the warranty status of each claim. The maximum
liability shall not exceed the purchase price.
DieselPower® Australia makes no other warranty, whether written or oral, expressed or implied with respect to this product. This limited
warranty shall not apply to the cost of labor, material or other cost in connection with the removal and/or replacement from the claimant’s
vehicle and in no event will held liable for lost profits, punitive, incidental, special, or any other consequential damages, regardless of
whether had notice of the potential of any loss or damage.
WIRE IN MODULE CONDITIONS:
You should seek professional advice before installing your module. Due to unpublished variations in vehicle models by manufacturers
we advise that these modules should be fitted by an experienced and qualified professional person. We make no claims to the accuracy
of ECU pin out locations supplied by Diesel Power Australia due to this.
Incorrect installation will void this warranty. We advise that voltages on the wire in harness be tested with the vehicle in the off
position, ON position/motor off and in the on position with the vehicle idling prior to plugging the module in to determine correct
This warranty supersedes all previously issued warranties for any and all previously purchased products.
DieselPower® and the DieselPower® Logo is a registered trademark in Australia.